Quick answer: Angi's Minneapolis garage door repair cost guide (updated August 9, 2026) lists broken spring repair at $150–$350. HomeBlue's older Minneapolis spring figure is $200–$330 (published September 2022). Replacing both springs, high-cycle springs, heavy or insulated doors, and after-hours visits cost more. The company you're connected with sets its own price.
Published price ranges
| Source | What it covers | Typical range |
|---|---|---|
| Angi, Minneapolis repair guide (updated Aug. 9, 2026) | Broken spring repair | $150–$350 |
| Angi, Minneapolis repair guide (updated Aug. 9, 2026) | Technician labor, Minneapolis | $75–$120 per hour |
| HomeBlue, Minneapolis (published Sept. 17, 2022) | Spring replacement, parts and labor | $200–$330 |
| HomeAidPros, Minneapolis (2026; based on national averages) | One torsion spring | $200–$350 |
| HomeAidPros, Minneapolis (2026; based on national averages) | Both torsion springs | $250–$500 |
| HomeAidPros, Minneapolis (2026; based on national averages) | Extension springs, per pair | $150–$300 |
| Angi, national spring replacement guide (updated July 2026) | Spring replacement, U.S. | $250 average; $150–$350 |
Third-party estimates, not quotes from Twin Cities Garage Door SOS or any company we refer to. The HomeBlue figure is older, and HomeAidPros notes its figures are based on national averages, so treat both as rough context. Minneapolis-specific Angi figures are preferred where they exist.
Torsion vs. extension springs
For a side-by-side comparison and conversion costs, see torsion vs. extension springs.
Torsion springs sit on a bar above the door and twist to store energy. HomeAidPros' figures put torsion toward the higher end, and HomeBlue describes torsion as the top of its Minneapolis range. Angi estimates they last about 8–15 years.
Extension springs run along the side tracks and stretch as the door closes. They're often less expensive to replace, and Angi estimates they last about 7–12 years. Each one should have a safety cable through its center.
One spring or both?
If your door has two springs and one breaks, the other one is the same age and has the same wear. Angi recommends replacing both at once to keep the door balanced. Replacing both costs more today, but it can save you a second service call when the other spring goes. Ask for both prices.
What else affects the price
- High-cycle springs. They cost more up front and last longer—useful if the garage is your main entrance.
- Door weight and size. Heavy, insulated, wood, or double-wide doors need heavier springs. Many Twin Cities homes use insulated doors for winter.
- After-hours or weekend visits. Angi's Minneapolis guide notes emergency calls—common in winter when springs fail—can run higher.
- Collateral damage. Cables, drums, or rollers damaged when the spring broke.
- Cold-weather wear. Angi notes frigid winters can freeze springs and stiffen tracks, and road salt can corrode metal parts faster—so related parts sometimes need attention in the same visit. See broken springs in cold weather.
- Labor. Angi puts Minneapolis garage door labor at $75–$120 per hour. A simple spring replacement usually takes an hour or two.
What a fair quote includes
- The number and type of springs (torsion or extension) and their cycle rating
- Whether both springs are being replaced, and the price for one vs. both
- Any other parts, such as cables, drums, rollers, or bearings, listed separately
- Trip, service-call, or after-hours fees
- The warranty on parts and on labor
- A total price before work starts
For other repairs (openers, track, panels, new doors), see the Twin Cities garage door repair cost guide. Need a spring replaced now? Request broken spring repair.
Getting help
Twin Cities Garage Door SOS is a free referral service for homeowners. We're not a contractor. We connect you with one independent local garage door company; that company sets its own price. How it works.
Frequently asked questions
Why do quotes for the same spring job vary so much?
Spring size and quality (standard vs. high-cycle), one spring vs. two, the door's weight (insulated doors are often heavier), the time of day, and whether other parts like cables or drums also need work all change the price. A written, itemized quote makes comparison easier. The company you're connected with sets its own price.
Is a high-cycle spring worth it?
If you use the garage as your main entrance, often yes. Angi reports springs are typically rated for about 10,000 to 20,000 cycles; HomeAidPros' Minneapolis page describes high-cycle options in the 25,000–50,000 range. Ask for both prices.
Is DIY cheaper?
Parts-only kits can look cheap next to a service visit, but torsion springs aren't a DIY job. Injury risk and a mismatched spring that damages the opener wipe out any savings. See should you replace a spring yourself?.